Lowepro Pro Roller x200 & Elinchrom Quadra Flash
Following on from my post about utilising the Lowepro Pro Roller x200, painters extension pole and my 1420 VAL Spigot as a portable light stand.
http://ianpack.blogspot.co.uk/2014/05/1420-val-spigot-lowepro-pro-roller-x200.html
This blog will show the comprehensive Elinchrom Ranger Quadra kit in the x200.
That is a lot of kit in a relatively small bag! Lightweight lighting on the move.
Elinchrom flash is available from The Flash Centre. Email Simon Burfoot or call Brian Collier at the Birmingham branch.
The 1420 VAL Spigot is available from selected retailers in the UK and direct from me for US or UK customers.
If you're serious about your photographic lighting then maybe The LIGHT Side Facebook group https://www.facebook.com/groups/thelightsidegroup/ will interest you. It's about all things to do with light and lighting. TLS is a closed group so someone will need to add you or you'll need to send a request to be added. It's a friendly group, with a degree of humour and some great photographers willing to share and contribute.
http://ianpack.blogspot.co.uk/2014/05/1420-val-spigot-lowepro-pro-roller-x200.html
This blog will show the comprehensive Elinchrom Ranger Quadra kit in the x200.
This kit I find provides the basis for much of my location work. It may added to as necessary, but in this form it's packed and ready to go. The cameras and lenses are in a Lowepro Magnum 400 AW.
What's in the bag?
- 2 x Quadra A Heads with Wilson caps from The Flash Centre.
- 2 x 2.5m Quadra leads
- 1 x 5m Quadra lead
- 1 x Quadra controller
- 2 x Quadra batteries (not the new Lithium ones)
- 1 x Quadra battery charger
- 1 x 18cm Quadra fit standard reflector
- 1 x grid for 18cm Quadra fit standard reflector
- 1 x case with Skyport trigger and receiver for Speedlite, spare batteries etc
- 1 x Skyport receiver charger
- 1 x 13.5cm Quadra reflector modified with barn doors
- 1 x 56cm Elinchrom Portalite Octa softbox
- 1 x 60cm Elinchrom Portalite Square softbox NB I carry only one adaptor for this and the Octa
- 1 x Elinchrom small translucent umbrella
- 1 x Lastolite Ezybox to Quadra adaptor
- 1 x Elinchrom deflector set (silver, gold, white, translucent)
- 2 x Nano stand rip-offs
- 1 x short length 16mm aluminium tube wrapped with pipe insulation as a handle for a Quadra head
- 1 x 1420 VAL Spigot
- White grid cloth diffusion material
- ½ CTS Grid Cloth colour corrected diffusion material
- ½ CTB Grid Cloth colour corrected diffusion material
- Few feet of Black Wrap/Cinefoil for creating shoots and general light control
- 20" white translucent pop-up Lastolite reflector/diffuser
- 2 x double clips for attaching gels and/or diffusion material to 18cm reflector
- C47 Clothes pegs/pins and holdback spring clips
- Micro gaffer tape
- LEE Filters Colour Magic Saturates pack lighting filters
- LEE Filters Colour Magic Cosmetics pack lighting filters
- 1 x sandbag, empty
- Folder containing printed Quadra instruction manual, lighting modifer test sheets and Rosco Filter Facts
That is a lot of kit in a relatively small bag! Lightweight lighting on the move.
Elinchrom flash is available from The Flash Centre. Email Simon Burfoot or call Brian Collier at the Birmingham branch.
The 1420 VAL Spigot is available from selected retailers in the UK and direct from me for US or UK customers.
If you're serious about your photographic lighting then maybe The LIGHT Side Facebook group https://www.facebook.com/groups/thelightsidegroup/ will interest you. It's about all things to do with light and lighting. TLS is a closed group so someone will need to add you or you'll need to send a request to be added. It's a friendly group, with a degree of humour and some great photographers willing to share and contribute.
Comments
Post a Comment